Mill-Max Zero8 SMT PCB Connector with 0.8mm Pitch
5 January, 2019
Mill-Max has recently launched its zero profile receptacles which eliminates any above board connector protrusion, enabling overall package height to be reduced. These receptacles have a precision machined, hexagon shaped flange which is pressed into the PCB Plated Through-Hole (PTH) until flush with the surface of the board. No soldering is required as the press-fit forms a gas-tight connection with a properly specified plated through hole. After installation, the zero profile PCB contacts enable a broad range of devices to be plugged in while minimising overall interconnect height.
More details about the Mill-Max Zero8 Series SMT PCB Connector can be read here.
YOU MAY BE INTERESTED IN…
Compression Mount Spring-Loaded Connectors
3 August, 2019
The 858-22-00X-80-XX1101 and 858-22-00X-80-XX2101 connectors are new additions to the 4mm pitch rugged spring-loaded series, they are the first Mill-Max connectors to incorporate spring pins with active plungers at each end. This unique feature makes these connectors ideal for situations in which a soldered connection is not desirable or may not be possible due to…
Mill-Max New Single and Double Row Omniball® Connectors
1 May, 2022
Mill-Max has released their new Omniball® spring-loaded connectors which are offered in single and double-row configurations. These connectors feature a rolling ball interface which is designed to maximise connections between components that slide or revolve into contact. The connectors use Omniball® contacts and spring-loaded pins in which the traditional plunger has been replaced by…
Mill-Max Early Engagement Receptacles
3 January, 2020
The latest receptacles designed by Mill-Max features minimal insertion length contact which allows for shorter mating leads. These receptacles accept lead diameters from .037” – .043” with a minimum mating lead length of .058” for top entry insertion. This is a 30% reduction in required lead length from the current receptacle offerings. The reduction is…
EPT – Replacement for Harting 16310301201000 (Obsolete)
8 June, 2022
Harting has recently announced that part number 16310301201000 will be obsolete. The 30pins ATCA Power Backplane Connector will no longer be recommended for use. New and existing customer will have to switch to an alternative manufacturer. Luckily, Wiselink has an equivalent replacement under EPT. The replacement part number is 512-50500-163. For more information on…
Cinch – 2.4mm Coax Connectors
6 August, 2020
Cinch Connectivity Solutions’ Johnson 2.4mm family now offers Solder End Launch Straddle Mount and ThruHole Connectors. Recognised industry leader in high performance end launch connectors, Johnson now supports frequencies up to 50 GHz. The 2.4mm line of precision connectors is growing to serve a variety of high frequency applications, operating to a maximum frequency…